| MOYA |
WATER INLET HOSE 26" FOR HOT/COLD WATER (H62.60XW1.32XD1.32 CM)
SKU: 1070384
26.9 RM |
- Made of EPDM rubber and covered with 304 stainless steel for heavy-duty resistance.
- Stainless steel braided water inlet with 26" length offers effective heat resistance and water press
- Able to withstand water pressure up to 7 bars and the maximum temperature of 100C.
|
HomePro Mutiara Damansara
| Promotion & Discount |
WATER INLET HOSE 26" FOR HOT/COLD WATER (H62.60XW1.32XD1.32 CM)
This 26” water inlet hose is made of quality EPDM rubber and reinforced with 304 stainless steel braided cover for increased durability. The hose is also manufactured without coating. This inlet hose is a perfect item for supplying both hot and room temperature water to any plumbing fixtures such as a basin faucet, shower water heater, toilet, and washing machines.
Made of EPDM rubber and covered with 304 stainless steel for heavy-duty resistance.
Stainless steel braided water inlet with 26" length offers effective heat resistance and water press
Able to withstand water pressure up to 7 bars and the maximum temperature of 100C.
Suitable with various plumping fixtures such as wash basins and others.
Compatible with G1/2” thread fittings.
For supplying water to plumbing fixtures.
Flush the water into the pipe out thoroughly to remove debris before installation.
Choose the right size of the product to suit the specific usage.
Valve should be closed prior to installation or maintenance.
Put the seal on both ends before fasten the connector.
Securely fasten the fitting on both ends with a wrench and ensure the assembly with water leakage te
Do not excessively tighten the fitting to avoid any damages.
Do not press the fitting since excessive force may cause damages to the product.
Do not with abrasive objects or harsh chemical agents, including hydrochloric acid, to clean the pro
Do not use with water that exceeds stated temperature or pressure.
Do not modify or misuse the product.
