Pearl Glo Wall Finish is a premium quality, highly durable emulsion with a mid sheen finish.
Pearl Glo is suitable for all normal interior wall and ceiling surfaces but is not suitable for use in areas subject to frequent or heavy condensation as in some kitchens and bathrooms.
High opacity and coverage.
Gives an attractive mid sheen finish that exudes the shimmers and luxury of pearls
Shimmer and luxury of pearls for interior walls and ceilings
Attractive mid-sheen finish that exudes the shimmers and luxury of pearls
Highly washable surfaces
Low odour, even when freshly painted
Environmentally preferred paint
Number of coats: 2 coats
Preparing the surfaces:
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. It is important to ensure that your wall is smooth and even to obtain the best results from Dulux Pure.Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further.
Brush or Roller
Clean all equipment with clean water immediately after use.
Keep away from food, drinks and animal feed. Store it in a cool and shaded place.
Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation.